Building my top end need help
#1
Building my top end need help
Hi guys i want to do a heads and cam package for my 99 m6 ss. I have 243 heads with yellow springs which i want to get ported but dont know to what..... i am going to get a VRX5 cam,The specs are 236/238 with .601/.605 lift on a 113 LSA... i dont drive the car every day it is my second driver, what do you guys recommend.... what other parts do i need?
#2
Teching In
Join Date: Feb 2010
Location: Carrollton/ South Padre Islande
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
U will need new hardened push rods and roller lifters for sure and headers and a ls6 in take for sure to help cam breath custom tune as well air fuel ratio if possible
#4
10 Second Club
iTrader: (4)
I would send your 243's off to AI to be ported, have a valve job and milled alittle. You will need hardened pushrods, also if your car has higher mileage i would get some Ls7 lifters to be safe. I would get some injectors and a racetronix 255lph fuel pump while your at it.