Base 2002 fog light and headlight mod help - LS1TECH

Go Back   LS1TECH > VEHICLE SPECIFIC FORUMS > Chevrolet Camaro 1967-2002
Log In 

Chevrolet Camaro 1967-2002 The forum for diehard Camaro fans

Base 2002 fog light and headlight mod help

Thread Tools Search this Thread
Old 12-15-2011, 07:55 AM   #1
Teching In
Join Date: Jan 2011
Posts: 1
Default Base 2002 fog light and headlight mod help

I have an 02 Base model. I want to install factory fog lights into my car. I went and got a radio bezel with the fog light switch installed and plugged in the connector just to see if it works. It does. Now where would the wires be capped off at? I see there is no fog light relay or wires heading to the underhood block, so now what? Would I have to cut the wiring harness under the dash apart and trace the wires until I find something? OR are they in the harness somewhere, and I can just run wire from there down to where the fogs would be?!

Also I did the high/low beam mod and there is one wire in particular that is yellow coming of a small box under the dash on the driver side that has a small nut in the middle. (If I take this connector out, all power to the inside of the car is gone.) This wire keeps getting supper hot and almost melting. Burnt wires smell real bad lol. Any one else have this problem? I have 6k HIDs for low beams and regular bulbs for the highs.
2002turbocamaro is offline   Reply With Quote

2002, bezel, camaro, cut, firebird, fog, housing, install, lamps, light, lights, ls1tech, melted, switch, wires

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -5. The time now is 01:34 AM.