Wanting opinoins
#1
Staging Lane
Thread Starter
Join Date: Jul 2011
Location: illinois
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Wanting opinoins
I am going to start buying parts for a build. I have been shopping around for and think I have came to the final list. Just wanting some of your guys input on this.
I know all of this is not going to pertain to internal engine, but just looking for opinions.
Car is a 2000 z28 auto, pacesetter lt's, ory, catback. I will be using the stock block, and bottom end. Im going to completely tear it down, inspect it, put new bearings in, and proceed with the following.
PRC stage 3 ls6 heads
MS4
Fast 102
NW 102 tb
Racetronix 42# injectors
Racetronix basic system fuel pump
Ls7 lifter
7.4 comp cam pushrods
trunion upgrade
Comp cams ultra gold rockers
Fast Toys lid
Double roller chain
LS6 ported oil pump
Powerband underdrive pulley
New Plugs and wires
Other parts:
Moroso electric water pump
ARP studs
3600 stall
rebuild current trans
add a truck alternator for good measure
TSP 1 7/8 headers w/ ory
Magnaflow catback (I hate current exhaust, opinions on this setup???)
Suspension:
BMR lowering springs
BMR LCA relocation brackets
BMR LCA
BMR panhard bar
BMR subframe connectors
Either QA1 shocks, or SLP Bilsteins (Opinions again please)
I will be doing all of the work myself before you ask. I am looking for any constructive criticism, additions, advice, or opinions.
Also, if anyone could give me a rough estimate of what this setup would yield as far as hp that would be great.
I know all of this is not going to pertain to internal engine, but just looking for opinions.
Car is a 2000 z28 auto, pacesetter lt's, ory, catback. I will be using the stock block, and bottom end. Im going to completely tear it down, inspect it, put new bearings in, and proceed with the following.
PRC stage 3 ls6 heads
MS4
Fast 102
NW 102 tb
Racetronix 42# injectors
Racetronix basic system fuel pump
Ls7 lifter
7.4 comp cam pushrods
trunion upgrade
Comp cams ultra gold rockers
Fast Toys lid
Double roller chain
LS6 ported oil pump
Powerband underdrive pulley
New Plugs and wires
Other parts:
Moroso electric water pump
ARP studs
3600 stall
rebuild current trans
add a truck alternator for good measure
TSP 1 7/8 headers w/ ory
Magnaflow catback (I hate current exhaust, opinions on this setup???)
Suspension:
BMR lowering springs
BMR LCA relocation brackets
BMR LCA
BMR panhard bar
BMR subframe connectors
Either QA1 shocks, or SLP Bilsteins (Opinions again please)
I will be doing all of the work myself before you ask. I am looking for any constructive criticism, additions, advice, or opinions.
Also, if anyone could give me a rough estimate of what this setup would yield as far as hp that would be great.