***BLS 98-02 CAMARO Bi-Xenon Projector Headlight Kit SUMMER 2015 GP***
#1
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Feb 2010
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
***BLS 98-02 CAMARO Bi-Xenon Projector Headlight Kit SUMMER 2015 GP***
Tired of your Camaro outrunning your factory headlights? Prefer to see more than 40 feet down the road when making those epic highway pulls? We have what you need! This Group Purchase will be available through July 12th!
If you don't want to tackle a retrofit by yourself, we have you covered. Have any questions regarding HIDs in general and want info? We can help. Customers have the choice to purchase just the housings or add options to their purchase for a complete kit.
Similar to previous GP's, we are offering these again with your choice of TYC chrome or DEPO whistler style housings. The TYC all chrome housings are high quality replacements for your tired/faded headlights. The DEPO whistler, black bezel housings are more cost effective and offer a bit more sinister look versus the all chrome units. With either selection, you will receive brand new headlights retrofitted with high quality bi-xenon projectors.
If you don't want to tackle a retrofit by yourself, we have you covered. Have any questions regarding HIDs in general and want info? We can help. Customers have the choice to purchase just the housings or add options to their purchase for a complete kit.
Similar to previous GP's, we are offering these again with your choice of TYC chrome or DEPO whistler style housings. The TYC all chrome housings are high quality replacements for your tired/faded headlights. The DEPO whistler, black bezel housings are more cost effective and offer a bit more sinister look versus the all chrome units. With either selection, you will receive brand new headlights retrofitted with high quality bi-xenon projectors.
Below are comparison shots between the various headlight options we offer.
Standard DEPO with black bezel
DEPO with Full "Blackout" Option - All chrome surfaces painted black (headlights, shrouds, etc)
TYC All Chrome
Daylight Pictures - Completely "Blacked-Out" Version Shown
All Chrome Housing
Other Customer Pictures
Night time Pictures - 5000K HID Lamps/35W Ballasts/MH1 Bi-Xenon Projector
Pricing and Options: You can purchase just the housings or a complete kit
Housing Choices
- DEPO "Whistlered" / Black Bezel Housings Only - $360 shipped within Continental US
- TYC All Chrome Housings Only - $465 shipped within Continental US
Both housing options include:
- MH1 5.0 Bi-Xenon Projectors Installed
- Chrome Gatling Gun Shrouds
- Housings Retrofitted & Resealed
Options
- Morimoto 35W HID Kit - 9005/9006 Relay Harness, ballasts, standard high beam splitters, lamps (choice of 4500k, 5000k or 6000k) - $150
- Complete "Blacked-Out" Option (Shrouds/Housing Reflectors) Painted - $75
- Low/High Beam Mod Wiring - $25 (This can be a free mod per the Lighting FAQ)
Please note the following:
- Projectors will be secured but allow for minor adjustment once installed in the vehicle.
- To ensure the bi-xenon function works properly, customers must choose to either perform the free low/high mod as listed in the Lighting FAQ or purchase the optional wiring kit.
- Customers purchasing only the retrofitted housings will not receive any HID equipment (lamps, ballasts, relay harness, etc).
The group purchase will run until (July 12th) or until we have 10 orders. If you are interested in purchasing, please send a PM with the title "I WANT THE BLS KIT" and you will be forwarded the payment information. Once the group buy concludes, the housings will be retro'd and shipped within 3-4 weeks.
#4
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Feb 2010
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Regarding the 50W kit request, we do not sell these headlights with a 50W kit as this is too much wattage/heat for the MH1 projectors to handle. The reflector bowls within the projector will get burnt and output will be diminished greatly.
The MH1 5.0 refers to the projectors we install in the headlight housings. The Morimoto HID kit is the lamps, ballasts and wiring harness that you may purchase with the headlights. You may purchase just the retrofitted housings and source your own kit or purchase through us for a complete package.
#6
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Feb 2010
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
As for the 7.0, we would not use these until they show they perform and have no quality issues. I believe they are addressing the threaded shaft length as well which would be nice. With any projector retrofit, we want to be sure the setup lasts so installing a new projector isn't ideal until we see the results. I'm sure these will be great but we also don't want to have many unhappy customers because we jumped the gun.
I hope that answers your question.
#7
It kinda does but in reality the reason why the shaft was shortened was to allow the bulb to be further seated in the projector allowing more light output (rather than have a portion of the bulb inside the shaft).
I ended up building my own set because I couldn't wait for the group purchase again and while the grinding of the stock bulb area is needed to get enough thread engagement for the V6.0 there really isn't any loss of integrity for the housing, its still thicker there than any other part of the lamp assembly.
I ended up building my own set because I couldn't wait for the group purchase again and while the grinding of the stock bulb area is needed to get enough thread engagement for the V6.0 there really isn't any loss of integrity for the housing, its still thicker there than any other part of the lamp assembly.