Chevrolet Performance LSX Challenge Series and LSX ShootoutChevrolet Performance LSX Challenge Series and LSX Shootout
• NMCA Florida - Bradenton Motorsports Park - Bradenton, FL - March 15-18, 2012
• Chevy High Performance Nationals - Atlanta Dragway - Commerce, GA - June 1-3, 2012
• Holley LS Fest - Beech Bend Raceway - Bowling Green, KY - September 7-9, 2012
• NMCA Indiana / LSX Shootout - Lucas Oil Raceway at Indianapolis Raceway Park - Indianapolis, IN - October 11-14, 2012
cars at the chassis shop right now getting the cage updated for a 8.50 cert and intake at n2o outlet. got alot of work to do when i get it back suspension wise and trying to shed weight. not sure if ill get it light enough to try to run real street or if ill stick to rumble again this year
glad every body working. i am working on my junk too. we could even have the new car there. i got the best working on it. (u fight pro mods with promods) LOL keith berry
__________________ 2011 LSX DRAG RADIAL WORLD CHAMPION
Wanting to get the shortblock built before then but the engine is still in the car, still trying to get this bog after shifting problem fixed. Might show up with a 5.3 in the car or a trickflow headed 347 with a solid roller. Who knows lol.
__________________
SLP SS, M6 - SLP AIRBOX, BLACKWING, FTP 104 LID, Speed Density, KOOKS 1-7/8X3, DUAL 3 INCH CUTOUTS ON KOOKS Y, SLP U/D, HP TUNERS, TICK MASTER, NO BACK SEATS, MWC 9 INCH LCA'S PANHARD BAR AND TORQUE ARM, STEEL DRIVESHAFT, M12, MONSTER CLUTCH, BOGARTS.
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,490
I'll be in Bradenton, just not sure what I'm doing yet....
Derek
__________________ 1970 Nova SS Clone: 383 SBC on 93 swill, 3600 lb street/strip ride, never fast enough... 2000 Formula: MACS, ORY, Magnaflow, !EGR, !AIR, Formato tune, stock long block, trans and rear end, still slow 2004 GMC Sierra 1500 ECSB 5.3: Magnaflow CB, K&N CAI, Formato tune, baby and car hauler
Check out pictures and info: www.fquick.com/Villain281H
Videos here: www.youtube.com/user/Villain281H
I have a pretty intake and elbow. Ir is about the only thing that is ready
__________________ 2002 TRANS AM, 8.29@166 1.28 60' only 20psi @#3750 5.30@139 1/8th Died 10/7/11
New project 98 Camaro X275 ERL engine, All Pro heads, WISECO pistons, Weldon fuel system PTE X275 88mm tubular manifold turbo kit made by SHEARER Fabrication, Midwest Chassis suspension