Havin' a little ls 5.3 fun!
12-19-2008, 09:41 PM
#1
Teching In
Thread Starter
Join Date: May 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Havin' a little ls 5.3 fun! 
12-19-2008, 10:37 PM
#3
Teching In
Thread Starter
Join Date: May 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
12-20-2008, 09:33 AM
#13
Teching In
Thread Starter
Join Date: May 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
No build thread sorry. I wish that I had,but while I was doing the install I didn't want to stop long enough to take the pics.
It's like when I started it for the first time I wanted to video it,but when I turned the key to make sure I had the starter power wired correct it cranked and ran!
Thanks guys.I'll try to get another tire shread and post a few other pics next week.
It's like when I started it for the first time I wanted to video it,but when I turned the key to make sure I had the starter power wired correct it cranked and ran!
Thanks guys.I'll try to get another tire shread and post a few other pics next week.
12-20-2008, 09:57 AM
#14
Cool man. Im big into the chevy's. The truck in my avatar is my '62, which I unfortunately wrecked. Then I got the '68, rebuilt it for my senior project, and now want to rebuild it again with Gen III power!
12-21-2008, 08:42 PM
#16
Teching In
Thread Starter
Join Date: May 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Here's a few pics of what I've done so far;
2003 5.3 4l60e
Camaro tank
2 1/2 Flowmaster deltaflow 40 twins
Camaro modified rack
Stock Silverado cluster
Also I dropped it 3 1/2 in front 4 in rear,disc brake front redrilled rear axle bolt pattern and added a posi to the 3.73s.
I allmost forgot it was a long wheel base when I bought it.
A whole lot left to go!!
2003 5.3 4l60e
Camaro tank
2 1/2 Flowmaster deltaflow 40 twins
Camaro modified rack
Stock Silverado cluster
Also I dropped it 3 1/2 in front 4 in rear,disc brake front redrilled rear axle bolt pattern and added a posi to the 3.73s.
I allmost forgot it was a long wheel base when I bought it.
A whole lot left to go!!
12-21-2008, 09:48 PM
#17
Wow that looks great! I really like the way the flows sound. do you have and H or X pipe? Thats the first time ive seen a late model instrument cluster used, how was that to hook up?
12-21-2008, 10:16 PM
#19
Teching In
Thread Starter
Join Date: May 2008
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
No crossover duals all the way.
Took a little research,but wasn't too bad when I found the pinouts.Now if I can just figure out how to get the warning led's disabled.
The pic was with the cruise set at 55.
Here's another short vid,scared my cameraman half to death.Gotta find a better location.No brakes just throttle.
Then traffic wouldn't allow another try.Sorry Lucky!
http://www.youtube.com/watch?v=hIx5B...layer_embedded
Took a little research,but wasn't too bad when I found the pinouts.Now if I can just figure out how to get the warning led's disabled.
The pic was with the cruise set at 55.
Here's another short vid,scared my cameraman half to death.Gotta find a better location.No brakes just throttle.
Then traffic wouldn't allow another try.Sorry Lucky!
http://www.youtube.com/watch?v=hIx5B...layer_embedded
12-21-2008, 11:09 PM
#20
That was awesome!! Must be makin some decent power, you got pretty sideways! No sweat, I understand about being hindered by traffic, and also not wanting to sit and roast your expensive tires. (Mine are junkers) My truck wont do that from a throttle stomp, so you've got me there! I cant wait to throw a Gen III in mine.