4l80e shifter questions
#1
13 Second Truck Club
Thread Starter
iTrader: (17)
Join Date: Aug 2008
Location: baton rouge
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
4l80e shifter questions
I have been looking around for a good shifter for my 80e in my chevelle. I have not found any exact matches within a reasonable price. I bought a B&M shifter i heard all I have to do is moddify the pan bracket. Anyone done this before? Also what shifters are you guys running?
#5
TECH Veteran
iTrader: (7)
i have the B&M pro ratchet shifter in my 69 chevelle-it has the option of working with a 4 sp (i have a 400 in now,switching to a4l80e, man. shift) right now it double clicks out of park, but wont when it is used in a 4 sp-pretty simple to fab up a bracket to fit the pan, my biggest concern is the shift lever on the trans, that the ratio will match the shifter-the lever on the 400 has a diff hole for 4 sp
for 4sp use, so it should-my 4l80e has the longer shifter arm, i might switch it to a shorter one if it interferes with the exhaust-i orig mocked up the 4l80e
when i installed the 6.0, so i hope when i try this one it will fit
here is a pretty cool website that has some brackets at the very bottom might help you out
http://www.transmissioncenter.net/4l80e.htm
for 4sp use, so it should-my 4l80e has the longer shifter arm, i might switch it to a shorter one if it interferes with the exhaust-i orig mocked up the 4l80e
when i installed the 6.0, so i hope when i try this one it will fit
here is a pretty cool website that has some brackets at the very bottom might help you out
http://www.transmissioncenter.net/4l80e.htm