Complete LS1/LS6 Victor JR, MSD 6010, demon carb, fuel pumps, for sale
#1
Complete LS1/LS6 Victor JR, MSD 6010, demon carb, fuel pumps, for sale
I just thought i'd post this here since there's a good chance someone is looking for a deal on this swap.
Carbs went on Ebay today
http://search.ebay.com/_W0QQsassZshawnmacanannyQQhtZ-1
Here is the Holley 97GPH pump ive been using with my setup. Works fine for around 500hp so far. Is internally regulator to about 6.5psi, my gauge showed 7psi. $40 shipped
Here is an oil filter sized 10 micron filter. It has a replacable fuel filter element inside. I paid like $50 for it i think summit sells them for $40. Its fittings are 3/8" npt. I have all hardware with it too. It's brand new. $25 shipped
Carbs went on Ebay today
http://search.ebay.com/_W0QQsassZshawnmacanannyQQhtZ-1
Here is the Holley 97GPH pump ive been using with my setup. Works fine for around 500hp so far. Is internally regulator to about 6.5psi, my gauge showed 7psi. $40 shipped
Here is an oil filter sized 10 micron filter. It has a replacable fuel filter element inside. I paid like $50 for it i think summit sells them for $40. Its fittings are 3/8" npt. I have all hardware with it too. It's brand new. $25 shipped
Last edited by Shawn MacAnanny; 05-10-2009 at 05:08 PM.
#6
If you buy either carburetor and the MSD box i will include both an Autometer Ultra-lite 4311 15 psi fuel pressure guage (no fuel line but has light and brackets) and an Autometer Ultra-lite 4484 Vacuum gauge with lights and brackets, no vac line. Both extremely useful in tuning a carburetor.
Trending Topics
#10
Do you really want that fuel filter? My paypal is Glynis@erols.com. I never got to take it to the track. First time out with the 30" MTs i launched the rear end off of the spring perches and slammed the tires into the wheel wells. Have since welded plates in place ofd any rubbre padds on spring pearches. As it sat with the demon carb untuned i would have guessed a low 12 high 11 car but no real solid times. It definately will pull the wheels i just havent gotten warm enough weather to try it.