6.0 idle issues
06-15-2009, 10:49 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2009
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
6.0 idle issues I put a 6.0 lq4 in a 88 suburban and when i start it it idles at 1200-1300. I have a 4 inch cold air intake with a k&N on it and i don't know why it is idling like that.
06-16-2009, 12:10 AM
#6
Teching In
iTrader: (1)
Join Date: Dec 2008
Location: Houston, Texas
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
do you put oil on your k and n filter? or did you encounter any water. My idle control valve was acting up because i put a little to much oil on my filter and it sucked it into the intake =/ lol causing my car to idle much higher.
06-16-2009, 06:48 PM
#7
On The Tree
Thread Starter
Join Date: Mar 2009
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
I bought the K&N new and it was already oiled. I sprayed the engine off with the garden hose and it wouldn't start. I waited a while and it started but it barely idles for 10 seconds than went to normal. The idle was high like this before the water incident. I think it may be a vaccuum leak on my cold air intake. THe intake itself is factory.
