Power steering fitment question

Reply Subscribe

Thread Tools

Search this Thread

06-21-2009, 07:49 PM

Thick_Ryan

Teching In

Thread Starter

Join Date: Apr 2007

Location: Rancho Bernardo, San Diego

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

Power steering fitment question

The power steering connections are too close to the steering. How do I fix this? If I cut it off in the rear of the pump does anyone offer a Compression to AN fitting?

Reply Like

06-21-2009, 08:01 PM

poconojoe

Banned

iTrader: (43)

Join Date: Aug 2008

Location: Northeast PA

Posts: 1,066

Likes: 0

Received 2 Likes on 2 Posts

Use a remote resivour setup, the pressure line will come directly out the back of the pump and the return will go to the remote resivour

Reply Like

06-21-2009, 08:11 PM

Thick_Ryan

Teching In

Thread Starter

Join Date: Apr 2007

Location: Rancho Bernardo, San Diego

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

Where do I find a remote reservoir and how much do they cost? Also, where is a typical place to mount the remote reservoir?

Reply Like

06-21-2009, 08:14 PM

ccrider

Staging Lane

iTrader: (9)

Join Date: Feb 2009

Location: illinois

Posts: 84

Likes: 0

Received 0 Likes on 0 Posts

can't you bend it that much? doesn't look it would take much, just use a tubing bender so you don't kink it.

Reply Like

06-21-2009, 09:12 PM

Thick_Ryan

Teching In

Thread Starter

Join Date: Apr 2007

Location: Rancho Bernardo, San Diego

Posts: 27

Likes: 0

Received 0 Likes on 0 Posts

I dont have a lot of experience with a bender and I really dont if it will work with how many bends are in the lines already coupled with the tight quarters,

Reply Like