TomM

iTrader: (56)

Yes, and new connectors, fuel pump relay and a 4 circuit fuse block to protect it all. He will also bring out any accessories leads you require......fans etc....

Also it has a 5 foot pigtail to mount the ECM just about anywhere you want, had I routed mine a little different, it would have gone under the front seat.......

Click on my link to see it on the car. I changed the loom to some I purchased from Jeg's, looked better then the plastic stuff...IMO....

T,

cdwood388

Speartech did my 6.0/4l80e rework with my harness and I believe it was 450 with the computer reprogrammed and everything else that I needed. He also answered the phone on a saturday at like 8:00pm his time to help me with a few problems I had on my end, nothing to do with his harness. I thought it was a good deal, you get what you pay for everytime.

BlackTA96

iTrader: (3)

Well, I just ordered the harness from the guy on ebay.
I got a 99-02 harness with the dual fan plugs and a 4l80e trans connector for 500 shipped to my door.

Convette

keep us posted on that I'm really interested on how that works for you.

y2k_ta

iTrader: (80)

I'm using one of the ebay stand-alone harnesses from "T_chr_ds" on my '95 'bird. It's really nice to have all new wiring!

BlackTA96

iTrader: (3)

Just got the stand alone in yesterday.
Its very well put together and EVERY connection/wire/relay is labeled. I'm very happy with it. Definetly worth the 500 bucks I paid for it.

the_merv

iTrader: (88)

Doesn't sound like a bad deal.

I paid $200 for my LS1 Harness and tweaked that.

BlackTA96

iTrader: (3)

Yup, this harness even has wires label specifically for the tach and speedo. Wire the labeled wires up to your speedo and tach and your up and running. Also has about 5ft of extra wire off the computer connection so you can mount it where ever you want. Super satisfied, lol.

NemeSS

iTrader: (127)

if its the same guy i contacted. it sounds like a very good buy. he took the time to reply to my inquiry and also answered some questions i asked.
i will def. be buying a hrness from them if i go efi on another project.

BlackTA96

iTrader: (3)

Yea, great customer service.
He actually gave me a call to be sure what I wanted. (I wanted a 4l80e setup and a few other odd ball options)

And he's right here in good ol' texas!

djquik88

iTrader: (20)

I was the one who bought the Tech Rods harness from the classified section for $150. I should have it later this week. I have had A Speartech Modded harness and loved it. I will let you know how the Tech Rods harness is when I get it.

It is not cheaper to go Speartech....no way. He does awesome work work though..

BlackTA96

iTrader: (3)

I didnt even know there was on in the classifieds. I would of scooped it up. LOL.

TomM

iTrader: (56)

Told ya you would be happy........

Shane is a good vendor, called me two or three times to verify what I needed.......I'll use him on my next swap for sure.....

T,

gto65lvr

iTrader: (8)

nice to hear good things on this I may be giving him a call soon once I have all my accesory placements figured out.!!!