71 chevelle

iTrader: (13)

I am looking to buy the headers below. They guy does not know what they are for. I know they are for a ls motor looks to be of a f-body camaro. Can someone confirm this and will they fit my 71 chevelle?

KJ@DHRC

I'm not 100% but I would say they are for a late 90's F body with an EGR tube. I would be willing to bet that they wouldn't clear your cross member not to mention your steering rod, and or power steering gear box. I believe I have access to a couple of different companies that build LSX headers for your vehicle. If you would like me to look into this a little more for ya just say the word!! Shoot me an email or PM!!

Bowtie70SS

iTrader: (10)

I have heard F-body headers would fit a Chevelle. In the old days the same headers that fit a 70-81 Camaro with a 350 would fit a 64-72 Chevelle with a 350. I originally bought Hooker BBC headers new for $133 and a set of GM performance header flanges for $22 each. I just could not stomach how Hooker gouges you on the LS headers. I found a deal on some used ones later. I still have the GM flanges though, the hooker swap plates came no where close to working on my car I made my own

71 chevelle

iTrader: (13)

Well these are going for about 100 that is why I am asking.

Schitzo

iTrader: (6)

those are 98-02 F-body ebay headers.
http://cgi.ebay.com/ebaymotors/98-99...Q5fAccessories

bczee

iTrader: (12)

The look like they may be for a Truck.. as the height of them look very tall as compared to a F-Body.. but that is from a look only from the picture.

Any yes.. a few of the early A-Body guys have used the F-Body LS1 headers with minor or no modification at all. It all depends on what adapter plates you use to mount the engine.