LCAC_Man

iTrader: (2)

If anyone has this diagram I could sure use it...don't want to sign up for another Alldatadiy sub just for that!

poconojoe

iTrader: (43)

Accelerator Pedal Position (APP) Sensor



Connector Part Information
15326829
6-Way F GT 150 Series, Sealed (BK)

Pin
Wire Color
Circuit Number
Function

A
PU
1272
Low Reference

B
L-BU
1162
APP Sensor 2 Signal

C
TN
1274
5 Volt Reference

D
BN
1271
Low Reference

E
D-BU
1161
APP Sensor 1 Signal

F
WH/BK
1164
5 Volt Reference

If you hold the harness plug with the wires away from you and the latch on the top, Pin F is on the left, pin A is on the right

LCAC_Man

iTrader: (2)

Thank You!!

LCAC_Man

iTrader: (2)

pin out and circuit numbers are the same as the TBSS....will I get lucky???

branndonw

iTrader: (3)

Possibly but dont hold your breath. Even though they have the same pinout, the two APP sensors may sweep differently. Both may sweep low to high or one could sweep low to high and the other high to low.

LCAC_Man

iTrader: (2)

Well...it's worth a shot...I've got the original pedal standing by just in case...though I'm not wanting to use it!!

LCAC_Man

iTrader: (2)

Just FYI the MCSS/Grand Prix/Impala pedal did not work with the 06 TBSS LS2....original pedal plugged in and worked fine though...so I guess I'm gonna have to suck it up and fab a bracket for it....