Thealien

iTrader: (2)

I don't have the engine here yet but I want to get the bolts needed to mount the engine to an engine stand. It is a 2007 5.3 truck engine. I did search and found the list with bolts but couldn't find any that said bellhousing?

How deep are those bolt holes in the engine?

Thanks
Mark

Jimbo1367

I believe they are 10MMx1.5MM and something like 40MM long. I'd double check the length though. I just bought a few and don't recall the length. I hope this helps SOME.

Thealien

iTrader: (2)

I will have to get longer anyway because of the engine stand but the thread size is what I needed. I don't want to get too long and bottom them out in the block does anyone know how deep the holes/thread is?

Thank you

71 chevelle

iTrader: (13)

M10x1.5x35 and M10x1.5x40
couldn't tell you how many of each

RPD_Vette84

iTrader: (30)

if this helps

https://ls1tech.com/forums/conversio...s-lengths.html

Petraszewsky

iTrader: (28)

If they are too long just buy some washers to space them out...

Pocket

iTrader: (22)

Get long ones and grind the length down

Thealien

iTrader: (2)

thanks everyone