Minimum requirements to start up a 5.3l
11-16-2009, 07:29 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: May 2009
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Minimum requirements to start up a 5.3l Kinda my first post here, but LS1Tech has already helped me spend quite a bit of money in the classifieds. Regardless, I've got a 240SX with a freshly mounted 5.3L in it. I've changed how I'm doing things and now don't plan to have the vehicle done by spring as I have some sheet metal repairs to make. But, I would like to run the motor to test that it does run and I don't have any other repairs to think about. so...
What's the minimum I need to do to get it up and running at least to verify that it does work? It's from a 2005 and I have the full harness from the donor silverado, pedal & TAC, MAF, so basically everything I can think of except O2 sensors, intake to oil pan and headers. I don't have a radiator at this point so I didn't know if that would be a problem.
Thanks,
Brooks
What's the minimum I need to do to get it up and running at least to verify that it does work? It's from a 2005 and I have the full harness from the donor silverado, pedal & TAC, MAF, so basically everything I can think of except O2 sensors, intake to oil pan and headers. I don't have a radiator at this point so I didn't know if that would be a problem.
Thanks,
Brooks
