chevynutss

I just purchased a fox body from a friend of mine and it already has a stock 4.6 k member from a 97 cobra in it. I was hoping to get away with just modifying a set of 4.6 modular motor mounts and using them with the stock 4.6 k member. I was also going to modify a set of 351 swap headers by just welding ls1 flanges onto them. I know I can buy the aje k member with the ls1 motor mounts but I would like to save some money and try to fab up some of my own parts.

Does anyone have any thoughts or suggestions? Any input is appreciated.
Thanks

LSNotch

iTrader: (1)

From what I've seen posted here, it does work. The only little problem is that the engine is moved forward or back, I can't remember. This may cause interference with headers, specially with Kooks that seems to be a hit or miss.

chevynutss

ok sounds good...I plan on fabbing up my own headers, so hopefully I can make those 351 1 3/4" swap headers work.