Help - need mini start length
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: College Station, TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Help - need mini start length
I'm doing an engine swap, and was finishing up the mounts when i realized that the factory starter is too long. This is a RHD car and the steering rack is in the way.
If anyone has one they could measure and tell me the length i'd appreciate it. I'd like to finish the mounts tomorrow, and i haven't had any luck on manufacturers websites, summit, etc.
thanks,
James
If anyone has one they could measure and tell me the length i'd appreciate it. I'd like to finish the mounts tomorrow, and i haven't had any luck on manufacturers websites, summit, etc.
thanks,
James
#3
Here is thread with a pic of the truck starter
https://ls1tech.com/forums/conversio...rter-body.html
I have the MSD starter. the truck starter above is shorter. Not sure about diameter of the motor.
Summit sells a ministarter that mounts the motor above the gear reduction unit. Might give you more clearance on the bottom. I notice they just raised the price siginificantly too. Use to be 170.
http://www.summitracing.com/parts/SU...0/?image=large
https://ls1tech.com/forums/conversio...rter-body.html
I have the MSD starter. the truck starter above is shorter. Not sure about diameter of the motor.
Summit sells a ministarter that mounts the motor above the gear reduction unit. Might give you more clearance on the bottom. I notice they just raised the price siginificantly too. Use to be 170.
http://www.summitracing.com/parts/SU...0/?image=large
Last edited by Pop N Wood; 01-02-2010 at 11:14 AM.
#4
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2004
Location: College Station, TX
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys - i need something about ~5 in long or i need to move the engine back further (which it's looking like). I'll call some of the manufactuers on monday and see what the dimensions are.