Single Turbo LS1 Notch Build *videos*
10-06-2012, 10:41 PM
#461
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
High temp coated the hot side parts before I wrap them
And I came up with the crazy idea of taking my 2 step harness and building it in to the engine harness so I don't have extra connectors at the coils and a lot less wire running from inside the car to out side. Sooooo I figured what not do the meth and boost controler too. So I'm gonna combine it all as one and relocate some things to add to the overall apperance and get that clean look. What am I thinking
And I came up with the crazy idea of taking my 2 step harness and building it in to the engine harness so I don't have extra connectors at the coils and a lot less wire running from inside the car to out side. Sooooo I figured what not do the meth and boost controler too. So I'm gonna combine it all as one and relocate some things to add to the overall apperance and get that clean look. What am I thinking
10-13-2012, 11:20 PM
#462
Staging Lane
Join Date: Jun 2011
Location: Australia
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
i wouldn't put it in the middle of manifold, my mate had his in one of those spots on the pro flow between the runners,and the sesnor was getting alot of heat soak, he changed it to just after the throttlle body blade with good reading results! meth injection only 383 ls combo.
10-14-2012, 10:31 AM
#463
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
Well I got my manifolds, merge and down pipe wraped. Got the fan mounted on the radiator and got it all back on the car. For the iat I just ended up putting it where the hole is for the map. Just drilled and tapped it. And then cleared the intake to help it keep its color.
10-21-2012, 04:57 PM
#466
Staging Lane
Join Date: Jun 2011
Location: Australia
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
you should be ok there dude, he had his deep in the manifold before he moved it.
now its just behind throttle body!
so how long till ya cruzing around? would like to here some results!
now its just behind throttle body!
so how long till ya cruzing around? would like to here some results!
10-21-2012, 07:44 PM
#467
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
I under estimated how much time doing all this work to the harness really takes, and by the time I get home from work I only have a few hours to work on it. But I'm making progress. I ended up cutting the harness in 1/2 aprox 16" after the pcm. And I'm re routing, shorting some make some longer and trying to hide it all. But it all comes down to time.
01-27-2013, 09:52 PM
#469
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
I made some good progress its just too hard to post pictures and such from my phone.
But..
I want to log my wideband and I know you can do it threw the egr or the a/c. Well my pcm is a 02 so it dosent have egr. So would I need to log it threw the a/c or can I still use the egr pin?
But..
I want to log my wideband and I know you can do it threw the egr or the a/c. Well my pcm is a 02 so it dosent have egr. So would I need to log it threw the a/c or can I still use the egr pin?
03-10-2013, 09:55 AM
#472
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I've been working on it a decent amount over the last month or so. I hope to hear it run again in the next few weeks. Now that the weather is getting nicer and the sun stays up longer I should be able to get a couple hours in a day.
04-15-2013, 06:46 PM
#473
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
radio panel i made
new trans cooler and mount
radiator puke tank
aerocatch hood pins
-12 feeds the 4303 fuel pump now, also new mounting bracket for the pump and bigger filter
the boost leash II wants to monitor the c02 pressure so i drilled and tapped the top of the waste gate. i also sent the boost leash II in for a update to include his pulsh leash
changed the location of the fuel regulator and the way the feed and return lines run.
new lower radiator hose
lokar throttle cable and custom bracket
new kill switch and moved in the trunk so it was not on the rear bumper any more, wont get rained on any more.
drivers side exhaust support and fender support. passanger side has a fender support too
new alkycontrol pump bracket
lower hose clamps double as mounts for the braided trans lines
new jegs battery hold down
manifold pressure pass threw
horn and volvo fan controler for taurs fan. pcm will now control the fan
taurs fan on griffin 31x19x3 radiator
how she sits as of now.
new trans cooler and mount
radiator puke tank
aerocatch hood pins
-12 feeds the 4303 fuel pump now, also new mounting bracket for the pump and bigger filter
the boost leash II wants to monitor the c02 pressure so i drilled and tapped the top of the waste gate. i also sent the boost leash II in for a update to include his pulsh leash
changed the location of the fuel regulator and the way the feed and return lines run.
new lower radiator hose
lokar throttle cable and custom bracket
new kill switch and moved in the trunk so it was not on the rear bumper any more, wont get rained on any more.
drivers side exhaust support and fender support. passanger side has a fender support too
new alkycontrol pump bracket
lower hose clamps double as mounts for the braided trans lines
new jegs battery hold down
manifold pressure pass threw
horn and volvo fan controler for taurs fan. pcm will now control the fan
taurs fan on griffin 31x19x3 radiator
how she sits as of now.
04-23-2013, 06:35 AM
#476
Teching In
Join Date: Apr 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
04-23-2013, 09:20 PM
#478
11 Second Club
Thread Starter
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, and yeah it was on a s380 and i went 151 mph with it. Nice lope, quick spool. Maybe martin at tick or lil john might read this and be able to set you in the right direction. Hke speced it for me with street car in mind.
04-25-2013, 11:04 PM
#479
Teching In
Join Date: Sep 2008
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I have been following your build. I have a LS fox motor plated and recently sold my meziere pump. I am going back to a stock style pump. My truck pump will not work unless I mill it. What pump did you end up using. BTW nice car!