L92 with VVT project - MAF/intake recommendation
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: SW Florida
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
L92 with VVT project - MAF/intake recommendation
Hey guys. This is taking shape and I need a few more parts. Just a MAF and air intake.
Please help with a suggestion. Looking for something easy to tune.
Thanks!
http://www.flickr.com/photos/41575483@N07/4396960304/
Please help with a suggestion. Looking for something easy to tune.
Thanks!
http://www.flickr.com/photos/41575483@N07/4396960304/
#2
Hi
Hi,
I have a L92 in my AC Cobra replica. If you only have the engine and need all the electronics I strongly recomend Speartech!
The have a hole kit for you with ecu and complete harness for your engine.
If you have any questions you can allways send an email: henning.hedin@hotmail.com
I have a L92 in my AC Cobra replica. If you only have the engine and need all the electronics I strongly recomend Speartech!
The have a hole kit for you with ecu and complete harness for your engine.
If you have any questions you can allways send an email: henning.hedin@hotmail.com
#3
Hey 68problemchild, I've been reading your other posts on here and the Camaro forum. I noticed you ended up going with a 4l70e. I was hoping to use the 4l60e that I have, but I don't think it has the ISS. Is that the reason you went with the 70e? Looks like I am trying to do the same build as you, except in my 62 Nova. My issue right now is I can't find anyone that has successfully used a 60e in their swap. Any help or nudge in the right direction would be greatly appreciated.
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Location: SW Florida
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Woops, just saw this 6 months late.
Went with a 4L70E since the computers can talk to each other. Also can handle more torque.
The guys at S&P suggested this tranny. I wish I knew more about it.
So far its working just fine.
Still tuning the motor and perhaps looking for a new MAF.
PM me if you have any questions.
Any one know the part number for a stock L92 2007 Escalade MAF?
Went with a 4L70E since the computers can talk to each other. Also can handle more torque.
The guys at S&P suggested this tranny. I wish I knew more about it.
So far its working just fine.
Still tuning the motor and perhaps looking for a new MAF.
PM me if you have any questions.
Any one know the part number for a stock L92 2007 Escalade MAF?
Last edited by 68Problemchild; 10-18-2010 at 07:09 PM.