Manual in Fox body
#1
Manual in Fox body
has anyone started selling the modified turbocoupe pedals for this swap? Be nice if a guy could just order an assembly that is ready to go, and be done with it.
sorry if this topic has been rehashed.
sorry if this topic has been rehashed.
#4
Staging Lane
iTrader: (8)
Join Date: Sep 2009
Location: harpers ferry, wv
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
here are some pics not the greatest cause its in the car but ill try to get some better ones for you later. This is the 87 turbo coupe clutch master cylinder with the firewall boot,the master cylinder is $60 at autozone and i payed like $15 for the boot on ebay!!sorry this is the only photo i have in the car ill post more later
#5
TECH Apprentice
iTrader: (20)
Join Date: Jan 2007
Location: Spartanburg, SC
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
That looks like it sticks out too far.... Any pics of the clearance between the end of the master cylinder and the header yet?
Here are a few pics of mine with a turbo coupe pedal assembly and a mod. F-body master cylinder.
Here are a few pics of mine with a turbo coupe pedal assembly and a mod. F-body master cylinder.
#6
Staging Lane
iTrader: (8)
Join Date: Sep 2009
Location: harpers ferry, wv
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Yea i've actually had it together and drove and it worked great but your right it was tight i had to cut the back header tube and raise it about 1/2" but yours looked like it worked out great too.here is where i modified the stock mustang pedal assembly to t-bird coupe pedals sorry the pics are not that great but its all in the car