You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
I'm doing research for a future project, and I was wondering what a fair price is for an LS1 pullout that comes with everything needed to make it run. For the sake of argument lets say the swap has 60,000 miles on it.
My plan is to swap the engine into a Jaguar. I was looking into using a 5.3 LSx engine, but to make it work I'll have to use LS1 intake, accessory drive, and oil pan. By the time I do all that I might as well go LS1. On the other hand a 5.3 engine is much cheaper so maybe it's worth it...
Anyway, I'd like to hear what you think about this.
may not help much but you can also get a 6.0 pretty cheap & they can make alot of power...@ a local junkyard they had a pullout 6.0 lq4 for 800 bucks...but I ended up buying an ls1 for 3 grand with everything, accessories, transmission, wiring & ecu
__________________ 91 coupe ls1 swap: sold
1999 Camaro SS lq4/l92, torquer v2, stall, etc
My 99 ls1 t56 with everything complete was like $3400. Ls1's run quite a bit more than 5.3's or 6.0's and the 6 speed setups are much more than auto's. You can get a ls1 with an auto in the $2500 to $2800 range. A 5.3 with and auto I have seen for $1500 or so. It just depends what you want. Hope this helps, Josh
__________________ 02 T/A 408 l92 heads, nw 102mm. strange 12 bolt, 4l80built by www.northtexasconverter.com , circle d 3600 gt91 turbo eboost2 coolingmist methanol FIC2000 Injectors, dual walbro 450's
Tuning and boosting.
im trying to sell a 6.0 here in Craigslist in shreveport louisiana with everything from the fan to the yoke in the 4l80e all wires all accs fuse box even stubs out of the fuse box,x member and all.needs a rad fuel pump and driveshaft..cpl nibbles im asking 1800 and its still here after a week
When it was all said and done my $200 5.3L cost $1600 to get ready to drop in, but it took me 9 months to deal hunt all the necessary parts and not break the bank
That's a very good point. Those extras really add up. I was quoted $3,500 for a complete automatic pullout with 60,000. While this is much more than an LSx engine, after I do everything to make the LSx fit, it's not that much cheaper.
Originally Posted by Klimaxx
got my 2000 camaro ss ls1 with 57K on it with 4l60/ecm/maf/acc drive (minus alt)(no harness) for 1800 on CL las fall..even got to drive the car before he pulled it
That's a very good deal, but I haven't seen anything like that in Texas. Maybe I'm just looking in the wrong places...
Originally Posted by Jc1965
What year of Jaguar are you doing the swap in? I'm putting the finishing touches on a 406 sbc swap into a 1973 series I xj12.
I want to put an LS engine into a series III (1982-1987) XJ6. Right now I'm just in the research phase.
I paid $3,600 for a complete '00 LS1with the 4L60e, Howell harness and ECU with a purported 15,000 miles. Also had some S&P parts (and a custom engine cover kit) with it since it was in a Bel Air before.
This place is a very popular source for motors around here. I find their web site a very good source for pull out prices. they have an 02 LS1 motor and T56 with ony 4K miles for $3500. Seems like a good deal to me.
I have ~$1500 into my 5.3L/4L60E with corvette accessories and F-body oil pan. Right now I am still running the truck intake, but I have an LS6 intake setting on the shelf. I just need to get the LS1 fuel rails and different injector plugins and I'll be able to run it, but its low on the priority list.