classic79

Anyone run into this problem before. Searched but did not see anything relevant most seems to be with dbw setups. on an 89 suburban which is the old old body style truck when the pedal is floored only get a little over half throttle opening on TB. Using a 98 tahoe cable, but don't think thats the issue. I need more pedal travel or someway to change the ratio.

Any thoughts on this. Maybe an 96-99 pedal might bolt in and work?

yessir

iTrader: (5)

bend the pedal below the fulcrum....or change the throttle wheel. if your using a 00-02 ls1 throttle body switch the wheel to the 98-99 ls1 throttle body, i had the same problem and that fixed it

rotor vs. piston

iTrader: (3)

Just backing up yessir... bending the pedal just a bit worked for me.

classic79

OK I will give that a try then. I appreciate the response.

Pocket

iTrader: (22)

You can only bend it so far. To make up the last little bit I used crimp on fishing weights