fox 83 whit 6.0 questions
#1
fox 83 whit 6.0 questions
i..have a few questions ....im about to do mi swap...
and im still having doubts
if i buy the aje memmber
http://www.jegs.com/i/Anthony-Jones/...oductId=752065
what else do i need for engine asemmbling
do i need to change the oil pan .... one for ls1 ??
and finaly... i bought a th400 trany
what kind of converter should i buy ??
http://www.summitracing.com/parts/TCI-241101/
http://www.summitracing.com/parts/TCI-241001/
http://www.summitracing.com/parts/TCI-241400/
the car wolud be at the begining for street and weeken strip
mi question is the the converter is an especial one for ls type engine??
tks
and im still having doubts
if i buy the aje memmber
http://www.jegs.com/i/Anthony-Jones/...oductId=752065
what else do i need for engine asemmbling
do i need to change the oil pan .... one for ls1 ??
and finaly... i bought a th400 trany
what kind of converter should i buy ??
http://www.summitracing.com/parts/TCI-241101/
http://www.summitracing.com/parts/TCI-241001/
http://www.summitracing.com/parts/TCI-241400/
the car wolud be at the begining for street and weeken strip
mi question is the the converter is an especial one for ls type engine??
tks
#2
11 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Encinal/Kingsville, Texas
Posts: 840
Likes: 0
Received 1 Like
on
1 Post
Change the pan to an fbody or ctsv pan.
For the converter you have 2 options.
1. Use th400/sbc converter and run a crank spacer
2. Buy a converter for th400/lsx
I suggest going with a circle d or yank converter. Don't go cheap on this part. I have a circle d in my car and went from 13.5 to 12.4 with headers and the stall.
For the converter you have 2 options.
1. Use th400/sbc converter and run a crank spacer
2. Buy a converter for th400/lsx
I suggest going with a circle d or yank converter. Don't go cheap on this part. I have a circle d in my car and went from 13.5 to 12.4 with headers and the stall.