advice needed LT1 going in 94 Sierra
#1
Registered User
Thread Starter
Join Date: Nov 2010
Location: London Ont
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
advice needed LT1 going in 94 Sierra
Hi, I am new here and an alcoholic...jk
Anyways I came upon this site and thought this likely to be a good place for advice on the fastest way to put a LT1 TPI motor in my 94 Sierra pickup that is a throttle body 5.7. I am not new to mechanic work (what I do for a living) but never done any major wiring. I am just wondering what is the easiest to get my truck rolling again is. The motor is a TPI 5.7 crate motor that I am picking up out of a wrecked 88 GTA. I would like to use the TPI system rather than put the throttle body on it for obvious reasons. Any help advice etc greatly appreciated. Cheers
Anyways I came upon this site and thought this likely to be a good place for advice on the fastest way to put a LT1 TPI motor in my 94 Sierra pickup that is a throttle body 5.7. I am not new to mechanic work (what I do for a living) but never done any major wiring. I am just wondering what is the easiest to get my truck rolling again is. The motor is a TPI 5.7 crate motor that I am picking up out of a wrecked 88 GTA. I would like to use the TPI system rather than put the throttle body on it for obvious reasons. Any help advice etc greatly appreciated. Cheers
#2
TECH Addict
iTrader: (12)
Hi, I am new here and an alcoholic...jk
Anyways I came upon this site and thought this likely to be a good place for advice on the fastest way to put a LT1 TPI motor in my 94 Sierra pickup that is a throttle body 5.7. I am not new to mechanic work (what I do for a living) but never done any major wiring. I am just wondering what is the easiest to get my truck rolling again is. The motor is a TPI 5.7 crate motor that I am picking up out of a wrecked 88 GTA. I would like to use the TPI system rather than put the throttle body on it for obvious reasons. Any help advice etc greatly appreciated. Cheers
Anyways I came upon this site and thought this likely to be a good place for advice on the fastest way to put a LT1 TPI motor in my 94 Sierra pickup that is a throttle body 5.7. I am not new to mechanic work (what I do for a living) but never done any major wiring. I am just wondering what is the easiest to get my truck rolling again is. The motor is a TPI 5.7 crate motor that I am picking up out of a wrecked 88 GTA. I would like to use the TPI system rather than put the throttle body on it for obvious reasons. Any help advice etc greatly appreciated. Cheers
And what is a "throttle body 5.7"? TPI 5.7?