brp standup guys
11-20-2010, 09:53 AM
#1
Staging Lane
Thread Starter
Join Date: Sep 2008
Location: s.i, n.y
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
brp standup guys just wanted to say thanks to jeff and the guys at brp. i had installed one of their first run off headers for gbodys. i modified the trans bracket to work originally had it running in my car for a year and a half . i went to put a new cable in after the cable being 4 years old and my bracket wouldnt work anymore.(i guess using a old cable at the time helped me out being so worn) so i contacted jeff and he set me up with the revised left side header no questions asked. when he called hedman they were only making 1 3/4's so he called them and they stopped with what they were doing and made my 1 7/8 ceramic coated header. jeff called me back and told me that the header will be made and coated and ready to ship in 4 to 5 days. and sure enough it was exactly what he said and i recieved my header today.
it was such an ease to work with them and very easy to get in touch with. i would definitely do business with when it comes time for me to do another build no matter what car it is.. thanks jeff!!!!!
it was such an ease to work with them and very easy to get in touch with. i would definitely do business with when it comes time for me to do another build no matter what car it is.. thanks jeff!!!!!
11-20-2010, 01:25 PM
#2
Glad to hear. BRP seems to be trying hard to clean up his rep on this board.
11-22-2010, 08:14 AM
#4
FormerVendor
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
87old442-Glad it worked out for you, I hope it gives you enough clearance for your shifter cable, sorry for the problems you had with the orginal design.
We are working hard to repair any issues that we find as quick as possible, the entire group here is dedicated to building the absolute best products.
Monte4ever- Sorry we weren't able to get your's built as quickly as 87olds442, if your's was the order placed on Friday, the biggest delay is the holiday's this week.
We are working hard to repair any issues that we find as quick as possible, the entire group here is dedicated to building the absolute best products.
Monte4ever- Sorry we weren't able to get your's built as quickly as 87olds442, if your's was the order placed on Friday, the biggest delay is the holiday's this week.
11-22-2010, 03:04 PM
#6
FormerVendor
iTrader: (3)
Join Date: Jan 2003
Location: Cumming, GA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Monte4ever- Sorry we weren't able to get your's built as quickly as 87olds442, if your's was the order placed on Friday, the biggest delay is the holiday's this week.[/QUOTE]
My order was placed on Nov 15 on a Monday.[/QUOTE]
I checked on your order and it should be at the coater, as soon as I have a tracking number I can send you a PM with it.
My order was placed on Nov 15 on a Monday.[/QUOTE]
I checked on your order and it should be at the coater, as soon as I have a tracking number I can send you a PM with it.
11-22-2010, 03:28 PM
#7
BRP, since you're watching this thread, I figured I'd post here. Can you go to the thread below and post any pictures or info on the a/c compressor notch plates you sell for '67-'69 Camaros / '68-74 Novas? You don't have any installed pictures on the site other than a small, hard to see one in the Camaro swap installaiton manual.
https://ls1tech.com/forums/conversio...8-74-nova.html
I'm curious if you've ever used a Trailblaser SS LS2 and compressor with your notch and mounts.
https://ls1tech.com/forums/conversio...8-74-nova.html
I'm curious if you've ever used a Trailblaser SS LS2 and compressor with your notch and mounts.