GM Performanc has no engines??...
10-11-2011, 01:42 PM
#4
Staging Lane
Join Date: May 2011
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I browsed the GMPP site too...
I've been working with a shop planning an EROD LS3 swap. The engine availability is pretty spotty---it apparently sells quickly & the distribution varies, with the most available in Texas (a month or two ago, at least). I found one locally & the quoted shipping cost to the shop wasn't too bad.
There was a post somewhere saying their prices would change October 1, but I haven't noticed any dramatic changes on their site.
My project is in a kind of limbo waiting for the shop to agree to start, so threads like this make me nervous.
I've been working with a shop planning an EROD LS3 swap. The engine availability is pretty spotty---it apparently sells quickly & the distribution varies, with the most available in Texas (a month or two ago, at least). I found one locally & the quoted shipping cost to the shop wasn't too bad.
There was a post somewhere saying their prices would change October 1, but I haven't noticed any dramatic changes on their site.
My project is in a kind of limbo waiting for the shop to agree to start, so threads like this make me nervous.
10-11-2011, 05:01 PM
#7
Staging Lane
Join Date: May 2011
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Posed the same question over on the Corvette forum:
http://forums.corvetteforum.com/nort...post1578933923
http://forums.corvetteforum.com/nort...post1578933923
Trending Topics
10-11-2011, 05:48 PM
#9
Teching In
Thread Starter
Join Date: Aug 2010
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I am moving toward an LS swap in my old car. I was looking around GM Perf. and I thought the prices were pretty good. I clicked on the sales register and there was a GM dealer pretty close by. I called them, they ran the part numbers and could not get the engines. I'm sure I can find one, I just wanted to swing by my local dealer and pick it up w/receipt. I used these P/N and contacted a GM dealer as listed. I thought the prices were pretty good, 5400 bucks.
http://www.gmperformanceparts.com/Pa...l.jsp?engine=2
http://www.gmperformanceparts.com/Pa...l.jsp?engine=2
10-11-2011, 06:33 PM
#11
Staging Lane
Join Date: May 2011
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I am moving toward an LS swap in my old car. I was looking around GM Perf. and I thought the prices were pretty good. I clicked on the sales register and there was a GM dealer pretty close by. I called them, they ran the part numbers and could not get the engines. I'm sure I can find one, I just wanted to swing by my local dealer and pick it up w/receipt. I used these P/N and contacted a GM dealer as listed. I thought the prices were pretty good, 5400 bucks.
http://www.gmperformanceparts.com/Pa...l.jsp?engine=2
http://www.gmperformanceparts.com/Pa...l.jsp?engine=2
I'm going to breath now...
10-12-2011, 12:03 PM
#12
LS6 crate motor was discontinued last year through GM. Some people have them still.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
