Mid plate
10-18-2011, 08:11 PM
#1
Staging Lane
Thread Starter
Join Date: Jan 2011
Location: southern ohio
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Mid plate Iv been considering using a midplate in my 88 fox it's mostly going to be a drag car I bought the car off a guy running a 351 and a c4 he's pulling the car apart and I bought it as a roller it has all upr tubular suspension and thought it may just be easier to run a mid plate and not haft to worry about fabing up mounts and what not any input on this is appreciated
10-19-2011, 11:56 AM
#3
Staging Lane
Thread Starter
Join Date: Jan 2011
Location: southern ohio
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Ok let me rephase a little I want to know if this would be a bad Idea for a car that will see a little bit of street use I have run motor plates for years in my drag cars but never in any thing that sees street use although it will mostly a race car any ways my question is what affect will I see using a mid plate on the street vs poly engine mounts