Corvette LS2 fuel injectors
10-23-2011, 12:10 AM
#2
Yes... but you have other more important questions to ask.. ..! but before I get into answering those questions (that have not been asked yet)... suggest you tell us more information on specific (engine, intake, wiring harness, etc) of what your doing...
10-23-2011, 11:07 AM
#3
Teching In
Thread Starter
Join Date: Sep 2011
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Your absolutely right! Here are the specifics...
Engine is a LQ4/LQ9 with 317 aluminum heads from a 2002 Cadillac Escalade.
Intake is a LS2 from a 2005 Corvette with stock injectors and 90mm throttle body from Eldelbrock
Harness will be modified and built to be a standalone. I will probably end up buying an LS1 harness for the retrofit
Cam is stock from an Escalade but I plan to upgrade to atleast a Zo6 cam or bigger.
All the above is planned to go into a 1971 Nova with my built 200r4 Transmission
Engine is a LQ4/LQ9 with 317 aluminum heads from a 2002 Cadillac Escalade.
Intake is a LS2 from a 2005 Corvette with stock injectors and 90mm throttle body from Eldelbrock
Harness will be modified and built to be a standalone. I will probably end up buying an LS1 harness for the retrofit
Cam is stock from an Escalade but I plan to upgrade to atleast a Zo6 cam or bigger.
All the above is planned to go into a 1971 Nova with my built 200r4 Transmission
10-24-2011, 11:27 AM
#4
Make sure you get the correct injector connectors (LS1 are EV1, LS2 are EV6).
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
10-25-2011, 02:39 AM
#5
For the most part.. no problem, as PSI stated, that is part of the Wiring and unique part that are involved.
Two issue is about the Truck front accessories with the Car intake. just research on what you need to do there..
other issue is getting the 200R4 TV cable setup and working.
keep us posted on your project.
BC
Two issue is about the Truck front accessories with the Car intake. just research on what you need to do there..
other issue is getting the 200R4 TV cable setup and working.
keep us posted on your project.
BC
