ZTwentyAteU

iTrader: (12)

hery guys, figured id post up my 93 wrangler yj with 5.3 swap. Its all done, except for making the speedo work and tach wiring.

For now its a stock 5.3 with edelbrock shortys, flowmasters. 2000 f body PCM and truck harness.
700r4 trans with goodies and a 3200 converter, 241c transfer case
36in buckshot mudders

BDS 2in springs, springover conversion, panhard bar, and shackles. I drive it all over the place and wheel it often.

I'll try to get some videos up. Only thing I dont have on her is good axles yet, but I did put Yukon chromolys in the d35 out back after snapping the stock drivers side doing burnouts! It has 4.10 gears stockIts a light rig, so even the stock 5.3 feels fast! The stock jeep radiator cools it perfect, never sees over 190 degrees

This summer i'll prob do a decent cam..for sound and more mid range power for ***** and giggles.

I need better pics but heres how it sits now

Rick Speed

iTrader: (55)

That's cool man nice job!

trav-tech

iTrader: (1)

What adapter are you running from trans to t case? I'm collecting parts for a 5.3 4L60E np242j swap in my 95 zj all i have left to get in the 4L60E.

Tig

Very cool. Looks great.
Lets see it in action.

ZTwentyAteU

iTrader: (12)

did some wheelin today. Broke a spider gear (they were welded by a previous owner) It was wet and sloppy, but the 5.3 power makes up for it! All my buddies have rock crawlers, so I follow them...where i'm not supposed to be going haha

ZTwentyAteU

iTrader: (12)

Its a 241c, so it bolts right up

I have an extra one, missing tail shaft bolts. Other than that I believe its in good condition

trav-tech

iTrader: (1)

you looking to sell it? pm me if so.

Sandmann120

iTrader: (1)

Looks like a lot of fun. Very close to a build I've been kicking around.

ZTwentyAteU

iTrader: (12)

I get offers all the time. I think I just have too much fun to sell it. Nothing like being in a jeep, climbing a hill on the rev limiter

BLWN1

iTrader: (6)

Im new to them, 241c come stock?

ZTwentyAteU

iTrader: (12)

The 241c was installed in fullsize blazers, suburbans and tahoes from 87-98. I'm pretty sure the trucks got the same one
Its just a better version of a 208 case that the older trucks had

Its not a stock jeep transfer case..just a stock chevy truck one

ZTwentyAteU

iTrader: (12)

anyone have tips on heater core flow? I've never had a swap that the heat didnt work right, but this thing, the heater core just dont get hot enough to work good

psiconversion

iTrader: (5)

Are both heater hoses getting hot? Did you recently replace it.

Jon
PSI

ZTwentyAteU

iTrader: (12)

I messed with it today, I blew through the core with air..it worked for, about an hr. When I pulled the lines, it looked merky/muddy water. I think the heater core is stopping up, i'm going to try to flush it with a water hose. If that done work, i'm going to replace it. One hose was getting hot, other still cold. I flushed it and both got hot, but the heat came and went.

video of messin around:
http://www.youtube.com/watch?v=9qynA...2&feature=plcp

metalmilitia606

iTrader: (8)

I wish I had a jeep or some big suv/truck. I want to run over something and not worry about it

ZTwentyAteU

iTrader: (12)

The 5.3 jeep is like having a camaro that climbs anything lol.

except, you dont want to hammer it from a dead stop, the short wheelbase is hard to keep straight!

psiconversion

iTrader: (5)

I agree. Sounds like the heat core is clogged.

Jon
PSI

chevelleluvr

iTrader: (1)

Thinking abt doing one of these swaps myself, where did u get all your information from to do this swap?

back in black

iTrader: (6)

I am doing a swap like this right now except with a lq4 and granny 4 speed

TipsyMcStagger

iTrader: (1)

+1

Tipsy