70 Chevelle Headers
02-09-2012, 03:09 PM
#1
TECH Fanatic
Thread Starter
70 Chevelle Headers I saw a thread where some one use 4th gen Camaro headers in a GM A body but can't find it now. I am gonna put the 4.8 in the Chevelle this weekend and was wondering about headers. I don't want to spend tons of funds cuz they are not gonna be in there too long. Saw some stainless ones for about $200 on Ebay and was wondering if anyone has had luck fitting them in the 70 Abody. I am using "standard location" mounts.
02-09-2012, 03:23 PM
#2
On The Tree
iTrader: (2)
Join Date: Jun 2011
Location: Nashville, TN
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
I just tried this in my build with the standard location mounts and the Pacesetter headers. Check my thread.
The driver's side needs some massaging on the #1 primary, as it turns down about 1/4"-1/2" too soon and hits the crossmember.
The passenger's side fit like a glove for me, but it looks like the farthest out pipe would slightly interfere with the frame near the starter location.
BUT - I picked mine up used off of this site for ~$100 or so. Can't really go wrong that way. It is good enough to get things running.
The driver's side needs some massaging on the #1 primary, as it turns down about 1/4"-1/2" too soon and hits the crossmember.
The passenger's side fit like a glove for me, but it looks like the farthest out pipe would slightly interfere with the frame near the starter location.
BUT - I picked mine up used off of this site for ~$100 or so. Can't really go wrong that way. It is good enough to get things running.
