Clutch master cylinder
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Aug 2010
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Clutch master cylinder
Im swapping a fbody t56/tb ss ls2 into my 72 chevelle.. What hydraulic master cylinder did you guys that have done this swap use? i bought the ls adapter plate, ls7 clutch, and stock pedal assembly to use. Thanks Kevin
#5
Clutch Master
all of the ones I have seen from the auto parts houses only have the master cylinder and reservoir hose, it will not have the reservoir or braided line with the quick disconnect, you can probably source those used but its going to be a hassle and then there still used. Although the AutoZone master cylinder replacement which is still just the master cylinder and reservoir hose is a Raybestos unit and is what the G.M. set up uses matter of fact if you look closely at both master's you will see the raybestos part # the other post that is using a Tilton will not bolt up to the adaptor plate you bought without some type of adaptor that Tick peroformance will not sell separate, you have to buy their whole $300.00 set up.
Last edited by lizeec; 01-16-2012 at 10:31 AM.
#6
On The Tree
iTrader: (2)
Join Date: May 2011
Location: Ponchatoula, La.
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I have not bought it yet, but american powertrain has a complete setup with the adjustable wilwood master with a remote resovoir (sp?) if you need it, stainless line, and HRB, and an adjustable bracket for the firewall. It is kinda pricey, I think it is ~ $500, but it comes with everything. Pretty fine piece.
#7