Wiring help needed
05-28-2012, 09:39 PM
#1
Teching In
Thread Starter
Join Date: Mar 2012
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Wiring help needed Im putting an ls1 out of a 2000 firebird/t56 into a subaru wrx and its time to wire it up. I've searched and searched, but still have a few questions about some of the wires that I just dont know what to do with.
-5 volt reference wires?
-Throttle position sensor signal (V8 VIN G) (Loop into sensor return wire or delete both?)
-Sensor return (V8 VIN G)
-Ignition retard signal (V8 VIN G)
I've found a retrofit schematic for the harness after alot of searching so that helped out alot, and I went back and edit this, and Im still not sure about those wires.
-5 volt reference wires?
-Throttle position sensor signal (V8 VIN G) (Loop into sensor return wire or delete both?)
-Sensor return (V8 VIN G)
-Ignition retard signal (V8 VIN G)
I've found a retrofit schematic for the harness after alot of searching so that helped out alot, and I went back and edit this, and Im still not sure about those wires.
Last edited by LsxWRX; 05-29-2012 at 08:29 PM.
05-29-2012, 09:46 PM
#4
Teching In
Join Date: Nov 2010
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
