ignition feed problems
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: Savannah, GA
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
ignition feed problems
i had two wires that i had to transfer to my new 2002 pcm from my old 97 pcm
specifically these two
02 blue connector:
#19 repin with 97 black conn. #18 PINK Ignition Feed
#75 repin with 97 blue #4 PINK Ignition Feed
looking at the gm service site it says that the first will cause a no change and the second will cause no crank.
well when i was removing my old harness i fucked up and cut them and i dont know where they go now.
sooo can i hook them to a hot in run source and fix my problem?
specifically these two
02 blue connector:
#19 repin with 97 black conn. #18 PINK Ignition Feed
#75 repin with 97 blue #4 PINK Ignition Feed
looking at the gm service site it says that the first will cause a no change and the second will cause no crank.
well when i was removing my old harness i fucked up and cut them and i dont know where they go now.
sooo can i hook them to a hot in run source and fix my problem?