'85 C10 LS radiator HELP!!
#1
On The Tree
Thread Starter
Join Date: Feb 2012
Location: Glendale, Arizona
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
'85 C10 LS radiator HELP!!
I can't find a radiator for my swap! I'm doing an LQ4 and a 700R4 and I can't find a double pass radiator that's reasonably priced (under 500 bucks) can someone tell me what radiators work well with this swap?
#2
TECH Fanatic
Have you looked a the stock GM silverado truck rad 99-2006? There are two sizes a 28'' size and a 35'' size width. The larger ones had efans after 2005, stock on some models. Most times these can be had new for couple hundred bucks and some have auto trans coolers as well as oil coolers built in.
#3
On The Tree
Thread Starter
Join Date: Feb 2012
Location: Glendale, Arizona
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Have you looked a the stock GM silverado truck rad 99-2006? There are two sizes a 28'' size and a 35'' size width. The larger ones had efans after 2005, stock on some models. Most times these can be had new for couple hundred bucks and some have auto trans coolers as well as oil coolers built in.
But if they aren't that way then great!
Trending Topics
#8
going to need one for mine also .
did some looking around and come up with this one . and cross over to specs for our 73-87 trucks with ls swap and both pass side in/out ports. looks like only need to make tranny lines go to driver side is all.
http://www.summitracing.com/parts/GR...n/?prefilter=1
did some looking around and come up with this one . and cross over to specs for our 73-87 trucks with ls swap and both pass side in/out ports. looks like only need to make tranny lines go to driver side is all.
http://www.summitracing.com/parts/GR...n/?prefilter=1
#9
On The Tree
Thread Starter
Join Date: Feb 2012
Location: Glendale, Arizona
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
going to need one for mine also .
did some looking around and come up with this one . and cross over to specs for our 73-87 trucks with ls swap and both pass side in/out ports. looks like only need to make tranny lines go to driver side is all.
http://www.summitracing.com/parts/GR...n/?prefilter=1
did some looking around and come up with this one . and cross over to specs for our 73-87 trucks with ls swap and both pass side in/out ports. looks like only need to make tranny lines go to driver side is all.
http://www.summitracing.com/parts/GR...n/?prefilter=1
Isnt 33 inches too wide for our trucks? And I didn't know griffin even made radiators that cheap! But thank you for telling me!
#10
On The Tree
Thread Starter
Join Date: Feb 2012
Location: Glendale, Arizona
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
#12
On The Tree
Thread Starter
Join Date: Feb 2012
Location: Glendale, Arizona
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts