57 Chevy and 4l80e
#1
Teching In
Thread Starter
Join Date: Jun 2012
Location: Mesa, AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
57 Chevy and 4l80e
Has anyone used a 4L80e in a 57 Chevy? I am just in the initial planning stage and am gathering info. I don't want to alter the tunnel. Thanks.
#3
Teching In
Thread Starter
Join Date: Jun 2012
Location: Mesa, AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Here is a 55 that might help you out
https://ls1tech.com/forums/conversio...d-project.html
https://ls1tech.com/forums/conversio...d-project.html
#4
I just installed a 1992 5.7 with a 4l80e from a GMC van. I have a '57 that began life as a one ton flat bed. I clipped it with a '76 camaro and a rear end from a Nova. I used stock motor mounts and an aftermarket trans mount and installed it as low on the frame as possible. I have about an inch clearance. I am still working on the project and now I am looking to install new power brakes on frame and hoping I have enough side clearance. Gary McGillvary, Clarksville Tn.