Harness question
#1
Harness question
I'm working on my 68 camaro I got everything fitted to put the motor in.
I have a donor car an 02 camaro ls1/t56
Can I use the whole harness?
Do I need to take the harness somewheres to get it to work?
Do I keep all sensors on motor and tranny?
Another question was do I need a torque on for tranny?
Thanks sorry for all the question
I have a donor car an 02 camaro ls1/t56
Can I use the whole harness?
Do I need to take the harness somewheres to get it to work?
Do I keep all sensors on motor and tranny?
Another question was do I need a torque on for tranny?
Thanks sorry for all the question
#2
TECH Resident
iTrader: (4)
Join Date: Feb 2009
Location: Ohio
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
You can slap the whole harness on, but it will probably look like crap. Best to rework it some to fit better, or to buy a pre-made swap harness from a sponsor.
lt1swap.com has great info on the harness. Its very simple to do.
Keep all the sensors you need. Some people delete the MAF, some keep it. Rear O2s, EGR, and EVAP stuff are also optional depending on your emissions laws.
lt1swap.com has great info on the harness. Its very simple to do.
Keep all the sensors you need. Some people delete the MAF, some keep it. Rear O2s, EGR, and EVAP stuff are also optional depending on your emissions laws.
#6
TECH Resident
iTrader: (4)
Join Date: Feb 2009
Location: Ohio
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Nope. Just the engine stuff. Unless you want the F-body dash. The engine and transmission harness should come out as a single piece.
I suppose you could try to keep the ABS and traction control, but that would be a ton of custom work.
I suppose you could try to keep the ABS and traction control, but that would be a ton of custom work.
#7
LS1Tech Sponsor
iTrader: (5)
You dont need the emissions stuff for the engine. For the transmission i would recommend you keep the reverse lockout and vss. If you are going to run it in closed loop, keep the MAF and Front O2 Sensor hookups.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Trending Topics
#9
LS1Tech Sponsor
iTrader: (5)
Closed loop is when the PCM is getting feedback from the O2 Sensors to provide fuel and spark adjustments. This provides better driveability and fuel economy, typically. Closed Loop occurs when the engine reaches a certain temperature as well as a few other parameters.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#10
I've done a harness for a friend and reworked mine.. they work and were essentially free (minus cost for shrink tubing and solder).
However, unless you are very savvy with a DVOM, Checking for power and continuity, then I suggest letting someone do it for you that does it for a living. Spending the extra cash on a plug and plug harness from PSI will save you a lot of time, headache and worries. You could even sell your stock harness to recoup some costs. What's nice about PSI is Jon is on the boards all the time answering harness questions for no fee to the DIY type although he sells swap harnesses.. ironic? No just the best business out there for custom LSX crowd!
-Randy
However, unless you are very savvy with a DVOM, Checking for power and continuity, then I suggest letting someone do it for you that does it for a living. Spending the extra cash on a plug and plug harness from PSI will save you a lot of time, headache and worries. You could even sell your stock harness to recoup some costs. What's nice about PSI is Jon is on the boards all the time answering harness questions for no fee to the DIY type although he sells swap harnesses.. ironic? No just the best business out there for custom LSX crowd!
-Randy
#12
LS1Tech Sponsor
iTrader: (5)
Soulja,
Cost for the harness is $499 and it includes the T56 Reverse Lockout and VSS hookup.
Superbean,
Thanks for the kudos! We do what we can.
Jon
PSI
Cost for the harness is $499 and it includes the T56 Reverse Lockout and VSS hookup.
Superbean,
Thanks for the kudos! We do what we can.
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#14
LS1Tech Sponsor
iTrader: (5)
Soulja, FYI the harnesses are in stock.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'