E.rodz

iTrader: (4)

ok this seems to be taking forever but someday I hope it is worth it in the end. learning to tig weld again I just don't weld enough to get into a comfort zone so I force myself to do thing I am not comfortable with so I can get better with every weld here is the exhaust system we have come up with so far.

douglee25

Where is the exhaust going to exit?

Doug

E.rodz

iTrader: (4)

answer coming up! I kind of threw this out as a teaser and you are one of the only one who picked up on this!

E.rodz

iTrader: (4)

progress???????

douglee25

I knew that was what you were going to do!

Looks pimmmp!

Doug

E.rodz

iTrader: (4)

Thanks buddy just trying some out of the box thinking hope it works.so stay tuned in for more to come.

E.rodz

iTrader: (4)

a little update it has been taking forever learning Solid works and designing my crossmember and modifying the crap out of everything to make it work. what do you think?

sprech

iTrader: (1)

Man, that thing is hideous, said by no one that will ever look at that. Phenomenal job on that, and really the whole car.

douglee25

Lookin' good!

Doug

E.rodz

iTrader: (4)

I love taking work under the car that no one will ever see. lol seams like a waste sometimes it blows to be so **** but hopefully it will be worth it in the end.
Thanks Doug I hope to get on a roll so it will be a roller soon.

guero68

iTrader: (20)

freaking awesome...i dont alot of mod to my chevelle but dont think i will ever take it to this level...sweet build.

What accessory drive are you running? I went with holley ls mounts but limits my future plans for twins due to location of A/C Compressor and Alternator.

Thanks

E.rodz

iTrader: (4)

thanks for the compliment, hope to keep on pushing my limits and think outside the box and build something extraordinary .

Meangreen1

iTrader: (2)

What's been going on with your project?

Meangreen1

iTrader: (2)

My fav project by far but it seems no updates. I hope that means he finished it and is too busy driving.

E.rodz

iTrader: (4)

Sorry about the lack of updates kind of had a delay of game this summer. Driving the heck out of the belair,computer problems,truck problems,and attempting to learn Cad. At the same time. However I am getting back on track for this winter so there should be updates often coming up soon!

E.rodz

iTrader: (4)

ok here is where it is right now most of the hot piping is done and next it is on to the rear frame section time to cut it off and start over! motor going to the machine shop soon and it looks like full speed ahead we go!

Project GatTagO

iTrader: (7)

Thank God you got rid of those other wheels...these are much better.

What's going on with the front wheels? The ackerman looks all woncky...

Andrew

E.rodz

iTrader: (4)

Wheels were just on there for mock up these may or may not be the ones that will be on the car later. the front end is just hanging there with no tie rods hooked up it is just flopping around. stay tuned in for lots more to come!

E.rodz

iTrader: (4)

it has been super hard to get back on track with the Chevelle there has been just way to much going on to even get a spare minute. hoping nothing else gets me off track for a while and we can roll again! here is a little something I have been working on for a couple of weeks now.trying something different well at least for me it is new technique anyways hope this works!

E.rodz

iTrader: (4)

slow progress but still progress non the less!

fan shroud coming along but still not done yet.