Recomendations???
#1
Recomendations???
Looking for the optimal spot to drill and tap the oil pan for the turbo drain. Any input on where. I know when I drilled and tapped my old ford pan for the vortech it was like 3 inches from the front and maybe 1 inch down from the bottom of the rail. That was on a moroso deep sump pan under a 302. Now I am using a stock 5.3l truck oil pan? Also looking for a place for the stock fox oil pressure sending unit. Thanks
#2
TECH Fanatic
Same idea here. Needs to above the oil level line and hopefully opposite the windage side, so plan on the driver side, sheltered by the windage tray if possible.