Stumble/miss at part throttle/cruise
03-18-2013, 09:38 PM
#1
TECH Addict
Thread Starter
iTrader: (4)
Join Date: Feb 2002
Location: Enumclaw, WA
Posts: 2,566
Likes: 0
Received 0 Likes
on
0 Posts
Stumble/miss at part throttle/cruise LS3 top end with GMPP controller...
Very noticeable miss at party throttle but no misfire codes. Where should I start?
Very noticeable miss at party throttle but no misfire codes. Where should I start?
03-21-2013, 07:25 PM
#3
On The Tree
Join Date: Nov 2010
Location: Fairview , MO
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
when i put my car together i some how managed to get the O2 sensor plugs on the wrong sides (bank 1 on bank 2 O2 sensor and vice versa) and had the same symptoms that you are having. stumble/miss at low rpm and cruising but at wide open throttle it didnt miss a beat. never threw any codes either. swapped O2 sensor wires to the proper sides and its been working flawless since. hope this helps.
03-21-2013, 09:11 PM
#4
What MAF are you using? If it is the cartridge style, that could be where to start.
Jon
PSI
Jon
PSI
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
