LS1 Swap into 300zx having a problem!
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Bedford Tx
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Swap into 300zx having a problem!
I got a couple questions about the LS1 swap my brothers doing into a 1990 300zx, we got the car to crank but are not getting spark, so we believe the vats "anti theft bullshit?", and or the emissions that we removed are causeing this problem? If there are any other things i can look for to make sure that may not be the cause please let me know, we want to start it asap!!!!! We have fuel pressure but no spark.
Would the vats be the problem since the motor has been swaped into a car without vats or are the vats programmed into the pcm?
Thanks Guys
Garrison
Would the vats be the problem since the motor has been swaped into a car without vats or are the vats programmed into the pcm?
Thanks Guys
Garrison
#2
TECH Fanatic
iTrader: (6)
Join Date: Jan 2002
Location: Springfield, IL
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
Could be a number of things. Does the computer have the stock tune in it? VATS can be turned off in the tune with HPTuners or EFILive in the PCM. Do you have either of those?
Emissions stuff wouldn't cause a no spark issue.
Emissions stuff wouldn't cause a no spark issue.
#5