Blk4v00gt

Over the last year or so I have read through so many conversions I cant remember where I saw the different options for gauges.
I know some people have used an fbody cluster and also heard a factory 94 mustang cluster can be adapted to work as well.

I have tried to search but cant seem to find what im looking for. Does anyone have a write up on how to fit the fbody gauges into an sn95 dash? I found a picture that someone did it without the actual cluster, just the gauges and looked really clean but not sure how it was done.
Also can anyone confirm the 94 mustang cluster can work as well?

stangtrader

iTrader: (2)

I dont see why the 94 cluster wont work except maybe the tach and speedo,i used a fbody cluster in my fox and everything works but I also had to make a custome fuel level sender.i set mine in and trimmed away what was needed to make it fit in the dash

Blk4v00gt

Im wanting to have all gauges working so I guess I will try fbody cluster. Do you have any pictures of yours completed?

LS1PUNK

iTrader: (5)

Florida5.0 makes a cluster with autometer gauges.

I would sell you mine but its for a foxbody.

topendrunner

iTrader: (1)

florida 5.0 ftw

b20forlife

iTrader: (4)

how hard was it to adapt the speedo and tach with the florida 5.0? i was thinking about buying one for my fox

psi3000

You can always do something like a CarPC like I am doing. You dont have to spend a lot. You can do one for under $200.

http://imageshack.us/photo/my-images/266/indashoff.jpg/

http://imageshack.us/photo/my-images/21/unittopon.jpg/

http://imageshack.us/photo/my-images/526/tachspeed.jpg/

Blk4v00gt

I have looked into Florida 5.0 but for the money I will probanly jist do a Racepak dash. Was thinking of doong the fbody cluster just to save some money that I can spend on a nitrous setup

topendrunner

iTrader: (1)

one wire on each + power and ground

LS1PUNK

iTrader: (5)

Its pretty simple, I bought the gps adapter for the speedo and all you have to do is hook it up the calibrate it.

That's the route im going now, I wont need to run double/ share sensors like im doing now.

stangtrader

iTrader: (2)

Heres a pic,i think a sn95 would come out cleaner.

Blk4v00gt

Thanks