Another five.three turbo Foxbody
07-16-2014, 03:08 PM
#124
On The Tree
Thread Starter
Join Date: Jul 2013
Location: MN
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
It is getting close! Went over to a buddies shop and he asked what I needed. I was in a sea of mustang/LS stuff and still could only come up with a couple things. I'll update soon. Will be driving in a month. Need to find a tuner soon also.
08-12-2014, 11:19 PM
#127
On The Tree
Thread Starter
Join Date: Jul 2013
Location: MN
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
It's been hard to get out in the garage lately for me. I finished up the hot and cold side completely. Then I pulled the motor to weld a turbo drain bung on the pan/run feed, drain lines. Also got my serpentine setup done. Then decided to go through the brakes. Going manual M/S, line lock, and prop valve. Still contemplating giving the engine bay a quick shot of black while its so bare.
08-19-2014, 04:38 PM
#129
On The Tree
Join Date: Jan 2013
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
09-04-2014, 09:35 AM
#133
On The Tree
Thread Starter
Join Date: Jul 2013
Location: MN
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Wiring harness and driveshaft made.
A buddy went through my harness for a case of beer.
A local driveshaft place shortened and balanced one I bought used. Have under $300 into it.
09-14-2014, 03:06 PM
#136
On The Tree
Thread Starter
Join Date: Jul 2013
Location: MN
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
I removed around 10 inches or so, and had it balanced. That is one thing I wish I would have done while I was back there, might get it running without for now though.
