M6 Swap

iTrader: (1)

Can't figure out how to post a video!

lsxRanger94

Me neither on the video. I had to post on youtube and link to it.

lsxRanger94

There you go.

M6 Swap

iTrader: (1)

^^^^awesome bro thank you!

M6 Swap

iTrader: (1)

Just ordered some fuel system stuff. -6 line and filter/fittings from summit. Next is the vette works kit and pump $$$$$$$$$

M6 Swap

iTrader: (1)

Fuel system parts

ls1jorge

iTrader: (5)

Nice build so far man.

M6 Swap

iTrader: (1)

started building my fuel lines today

M6 Swap

iTrader: (1)

More fuel work.

Jimbo1367

Looking good. I like the fuel crossover in the back. Much cleaner looking IMO

M6 Swap

iTrader: (1)

Thanks jimbo. All I have left is to run the lines from the pump to the filter on the fuel rail. Also change out that blue/red fitting behind the press gauge to a black 1

M6 Swap

iTrader: (1)

Got the trans cooler lines done. And some more fuel line.

M6 Swap

iTrader: (1)

Wet sand and buff done! Here's some pics from inside the garage, tomorrow I'll pull it out in the sun

Jimbo1367

Looking good. Are the heater hoses kinked coming off the waterpump or is that just the angle of the pic? I do recall seeing on LS1tech that they (chain parts stores) carry heter hoses with 90* ends. Might be worth a SEARCH if you run into any pinch problems.

Keep up the good work bro!!!

M6 Swap

iTrader: (1)

Here's a few more pics. The sun was only hitting the back of the car so the side shots don't really do it any justice. The 1 pic of the trunk is the best. FYI The panel between the tail lights is going to get painted satin black so it didn't get buffed after we sanded it. Getting the rear bumper and the panel below the back glass painted this week also.

Jimbo1367

That looks REALLY nice sitting outside. Thanks for sharing!!!

M6 Swap

iTrader: (1)

Air intake mocked up, need to find a good spot for the IAT sensor now

Hawk465

iTrader: (10)

What transmission dipstick and tube are you using? Is that the stock F-body setup?

M6 Swap

iTrader: (1)

Dipstick came with the trans , 04 silverado. We just bent it down to clear the hood

ls1jorge

iTrader: (5)

so far so great man, car has came along way from before its better then ever! I still havent touched my 79 camaro although my ls1 shortblock started knocking & I recently bought an 07 ls2 shortblock for my 99z awaiting for parts & now ill have to rebuild the ls1 to just get it going.