Drag Project - LS1 Altered
#22
Staging Lane
Thread Starter
Join Date: Nov 2011
Location: Australia
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
I would be happy with an 8.60, but even that I am dubious of - at the end of the day it is a bracket car, and should be very consistent so it will run what it runs
#30
Staging Lane
Thread Starter
Join Date: Nov 2011
Location: Australia
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Delay box is just a RTD7 - Dedenbear.
No start line enhancer, just a line lock which activates at the same time as the transbrake.
#32
Staging Lane
Thread Starter
Join Date: Nov 2011
Location: Australia
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Been waiting way way too long for this piece of the puzzle which I got my hands on Monday: (mid engine plate)
So since then things have been moving at a pretty rapid pace, engine and trans are in and everything else around it is starting to go back onto the car.
Hit a snag with the clearance from the starter motor to the flexplate when it throws out, need to get the top of the starter motor machined so it will move the starter gear in closer to the flexplate.
Otherwise everything else has gone fairly smoothly.
More updates later..
So since then things have been moving at a pretty rapid pace, engine and trans are in and everything else around it is starting to go back onto the car.
Hit a snag with the clearance from the starter motor to the flexplate when it throws out, need to get the top of the starter motor machined so it will move the starter gear in closer to the flexplate.
Otherwise everything else has gone fairly smoothly.
More updates later..
#35
Staging Lane
Thread Starter
Join Date: Nov 2011
Location: Australia
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
They are made by an Australian company, NRE (Noonan Race Engineering)
http://www.noonanraceengineering.com.au/
Also renowned for their Top Alcohol Hemi heads.
http://www.noonanraceengineering.com.au/
Also renowned for their Top Alcohol Hemi heads.