76larkman

she needs to get dirty on cars, be careful she try to get you to cook.

HeadGames Dave

iTrader: (1)

and i said I wasn't gonna port the heads. Did combustion chambers today. Blended the chamber into the 50 degree exhaust valve job and the 45 intake. 5.7 head. Did a stock size valve on both sides. Had Ferrea make a custom exhaust valve with a nice tulip. More pics to come!

MillsMotorvation

Can you give dimentions on the rear wheels? Look like the rear of the car is uncut. What the back spaceing?NEVERMIND I SAW IT ON ANOTHER POST...VERY NICE BUILD

jmock52803

iTrader: (1)

what rear end? stock width? what rear suspenion, did the 15x10 with the 5" bs fit without rolling the fenders or tubing the frame?

HeadGames Dave

iTrader: (1)

stock rear end (10 bolt) with axles and a spool. Need to upgrade to a posi though

The wheels barely fit. I need to use a small spacer or do the frame. No where near the fender, but that might change if I do the spacer.

The car is away getting turbo's mounted, intercooler done and fuel system.

Beavis502

Man I have always loved Buick Regals but this is just making it even better. Still turbo but ls motor. Wow!

Me24seven

Nice build I'm doing a build something like this, would u be interested in making another support for the front end, I would buy one if you did

HeadGames Dave

iTrader: (1)

I did not make it. Gary Betsy's Performance Restorations made it to the car. I don't think they would be into doing it mailorder, but surely they would take something like that on with the car.

Me24seven

I have a friend about 30 mins from Gary's Betsy shop I will call to see if they could make one without the car actually being there thanks

HeadGames Dave

iTrader: (1)

i texted him the question. There was someone else on this thread that wanted one too.

It does make getting the nose off easier, and in one piece. but it is still a gigantic pain in the ***.

ReggD79LS1

iTrader: (4)

Awesome build.. Subscribing!!!

HeadGames Dave

iTrader: (1)

The custom 50 degree, stock size Ferrea Racing Components valve i got made sure is beautiful! <3

Monte4ever

iTrader: (2)

Loving this build........

HeadGames Dave

iTrader: (1)

Dropped the car off at 16W Fabworks to get the turbo's mounted and piping done. They had to make a flange in their in house CNC for the t4 to 3" so it can neck down to the 2.5 inch collector.

More pics to come, they are doing more today!!!!

HeadGames Dave

iTrader: (1)

HeadGames Dave

iTrader: (1)

Billet everything!!!! 16W fabworks is knocking it out of the park on this build!

Billet mounts. These will be really trick when the billet end tanks are on it

BrownMK3Kid

iTrader: (4)

this build is sick, and those manifolds are ****

Jimbo1367

$$$$$$$$$$$

HeadGames Dave

iTrader: (1)

Tomhames

iTrader: (3)

Incredible build ...... Can't wait for the vids and track times...
Congrats ......