Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

2007, 5.3 in a 95 Tahoe Swap Question

Thread Tools
 
Search this Thread
 
Old 11-25-2013, 04:21 PM
  #1  
Teching In
Thread Starter
 
Capt Chrysler's Avatar
 
Join Date: Nov 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default 2007, 5.3 in a 95 Tahoe Swap Question

Hello Folks,

Any problems with a 2007, 5.3 with AFM going in to a 1995 Tahoe?

I was able to pick up a loaded motor and transmission with 12000 mile on them. Just not sure about the flex fuel and AFM.

Thank You

Capt. Chrysler

(I spent 17 years in a Chrysler dealership and the name just stuck)
Old 11-26-2013, 11:08 AM
  #2  
TECH Senior Member
iTrader: (12)
 
bczee's Avatar
 
Join Date: Jan 2006
Location: Concord, CA
Posts: 6,665
Likes: 0
Received 5 Likes on 5 Posts

Default

As long as you either a) use all of the required equipement for the AFM or b) you removed all of the AFM equipement, chage anything them would require it to work as a non-AFM engine and then tune.. you should be ok.
Old 11-27-2013, 03:39 PM
  #3  
Teching In
Thread Starter
 
Capt Chrysler's Avatar
 
Join Date: Nov 2008
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks bczee,

I have found the info on the AFM/DOD delete. I picked up the motor yesterday and it was a 12,000 mile aluminium block 5.3.

Looks like the project is under way.

Capt. Chrysler



Quick Reply: 2007, 5.3 in a 95 Tahoe Swap Question



All times are GMT -5. The time now is 06:43 PM.