sick_46

iTrader: (3)

My wife is not going to be happy about this!! I had your forward facing kit on my 2v car and loved it. Now I have a 6.0 swapped coupe. I think this will be my next investment

sick_46

iTrader: (3)

When your building the down pipe keep in mind the guys like me running the 4l60 and 80e.

On 3 Performance

as of now I wouldn't plan on it but its not to say at some point we might cover it

Sounds good, if you have any questions on the setup or wanted to get one on order, just let us know

On 3 Performance

That shouldnt be a problem, the 3.5" dp did make things tighter but there is still a decent amount of room. More room than the fox cars have with a 5.0, t5 and 3" dp for reference

ringgold

What do you think would have to be done to keep A/C on the car with your turbo kit?

Is it the merge piping from the manifolds to the turbo that could be interfering or is it something else? May be doing an LS swap with a 4L80E into a foxbody car, but I would like to keep A/C if possible.

I am not expert on this stuff by any means and I just now getting really interested in it, so I am still learning all this LS swap stuff. Forgive me for the newby question.

On 3 Performance

Honestly I wish I had the answer but we didnt test with a/c at all so I dont know whats going to be involved if you were to try and make it work.

93Z2871805

iTrader: (5)

These kits should sell like mad. Looks good. On a waaay side note, any chance in getting you guys to look into modding one of your Mustang kits for 2v Crown Vics?

autogeek23

iTrader: (13)

that's my friends old car. 2.3 badges ftw

On 3 Performance

Its just not possible since there isnt an option for tubular suspension on those cars. I wish we could, a lot of people ask

I laughed when I saw the badges because it sure sounded like one angry 2.3. Unlike any other 2.3 I have seen :-)

lsxsaleen

What size primaries are you using?
Very excited to see you are bringing this out.
One of these may very well end up on my car.

93Z2871805

iTrader: (5)

Alright, looks like a remote mount will be in my future, lol.

bmeyer40

iTrader: (5)

Very interested. Id like to see more pics and videos of finished product.

NotchedPSI

When will this kit be available?

LSX Freak

Perfect... will definitely be picking up one when the time comes.

ShtBox93

Excited to be seeing this, as I just ordered a giant list for my 5.3 t56 setup, turbo kit is last one my list and after seeing this its getting a thumbs up from me and will be getting ordered soon as everything is put together in car. Is there warranty on any of the hotside? or the whole kit? what about the cold side if users liek myself are running blowthru carb setups?

thanks!

jlew0006

Will this fit an ls swap 99-04. Please say yes lol! If not any ideas on when that would be coming out? You guys can use my car to build a kit for it Hahaha.

PRAY HRD

iTrader: (119)

subscribed......will be doing a TT408 "budget" '93 notch build and interested in the manifold specs and if i can pic up a set of them vs the ebay up & forward headers. If so, how much will the turbo manifolds be and i'm assuming they're V'banded?

On 3 Performance

We are going to be running them from 1 3/4"

Its taken longer than expected just like everything else. Im guessing 4-5 weeks before we will be ready to start shipping

All warranty info we have posted on the site, check it out there. In your case you will end up needing a carb bonnet and possibly just another coupler to adapt to it. We dont have a setup for that but it shouldnt be hard on your end to adapt it from what we supply you.

I wouldnt know on the fitment but since your in Ohio, I might be interested to meet up with some mock up parts and see how close the fitment might be.

Once it comes down to shipping time, we will shoot more photos. As far as the design goes, check out our photos of the 5.0 fox system. The headers are designed very similar to that and vbanded

PRAY HRD

iTrader: (119)

Sounds good! So it looks like the alternator remains in the factory location right?

Colz

iTrader: (2)

Looks good I called and talked to you the other day about the kit than just found it on here. May be talking with you here in the next few weeks. What size flanges are your on3 turbos?