RS2SSxLS2

I bought a painless wiring harnesses for my LQ4, I have a dash harness for an 01 Z28 so here is the problem. 95 rs I pulled the old harness out but the new harness doesn't have the connectors for the headlights. HELP please......and is there anyone at Fort Stewart on here?

RS2SSxLS2

Here are pictures showing the plug at the head light connection. The new harness only has a back up light wire.

RS2SSxLS2

Picture 2

RS2SSxLS2

Somebody help

RS2SSxLS2

Can anybody help I'm dumb founded here?

superdave84

Are you sure that's a pigtail for headlights? There's way too many wires to be a headlight pigtail.

Most of us are not familiar with all of the Painless Wiring setups, as they are different for every vehicle. That's why you're getting no responses. If you're asking about stock pigtails, etc, some of us can help.

I suggest contacting Painless Wiring and asking them. You can always look at the fuse box to see what slots run the headlights and run your own wires.

RS2SSxLS2

It is head lights pig tail which includes turn signals and head lights. You would think somebody has done an LQ4 swap like this and used a painless harness.

RS2SSxLS2

Still need help here guys!!!

garys 68

iTrader: (1)

That pigtail looks used. Is that part of the new Painless harness? If so, Painless should be your first call.
You mention an 01 Z28 and a 95rs. Is that what the pigtail is on? What car is this going in and what are the front end lights connected to?

RS2SSxLS2

It's the pigtail on my 95 RS I bought a dash with cluster and harness for an 01 Z28 for interior upgrade. Under the hood is a painless wiring harness red and blue connectors, lq4 and PCM mounted on BMR kmember, ls2 intake with CBM throttle body adaptor spacer to utilize the truck cable throttle body on the car intake.

garys 68

iTrader: (1)

My guess, the Painless harness is motor only, completely independent of the front lights. The dash harness is pre 98 LS type and that's your pigtail. The later headlight is different. You'll need to find the wiring diagrams and set it up yourself. Or pay someone. No simple plug and play for this.

Blown06

iTrader: (32)

Use the plug from the factory harness, cut it back a few inches and BAM, you now have a pig tail.

RS2SSxLS2

The dash harness is 01 Z28 LS type, motor harness is from painless. I live in Hinesville ga aka Ft. Stewart so unless someone else on here is at Ft. Stewart I have to tackle this one on my own! So any help from you guys is much appreciated and needed

RS2SSxLS2

Wiring nitemare

garys 68

iTrader: (1)

Honestly, this is a 30 minute fix for someone who knows what they're doing.
Do you have schematics from the dash harness and from the car it's going in?

RS2SSxLS2

No I don't.......can u help

garys 68

iTrader: (1)

Not easy to do long distance.
I would suggest you search for the dash harness schematics (light switch, etc) and the front end of the car you have in the f body forums. I doubt these have much of an LS component tied directly to them.

RS2SSxLS2

See this is why I need somebody in the Fort Stewart area to help me. My car inside and out looks like wires are growing every where

RS2SSxLS2

Is there a separate wiring harness for the headlights?