Cuate

Any recommendations of people around the Houston area that do LS swap wiring and computer flash. I'm removing a 5.3 motor and transmission and complete wiring from a 2001 Tahoe and planning to install in a 1968 chevy truck.

Mike_hawk

You should use lt1swap.com and do the harness yourself, the guy that runs it flashes PCM's for $75. To make your own harness you only eliminate the stuff you don't need, and add 12v constant/ignition, and ground and a few relays. Plus you can route it how you want to and make it look cleaner. I made my own, got my PCM flashed and then I could drive it to a tuner because I'm cheap.

LS1 pwrd NOVA

iTrader: (2)

I'm going to try and do my own harness also.
Can't hurt to try to yourself as many peeps have done it.
Take about a day or two if you do it yourself but you will save $$$

Cuate

I'm all about saving money. Thanks for y'alls information, I'm looking at the wiring diagrams but not sure if I will be able to complete it my self.

LS1 pwrd NOVA

iTrader: (2)

Take your time, label and your good.

Nilla

The lt1swap guy has a facebook page, under the albums he has pic by picture tutorials
https://www.facebook.com/pages/LT1-S...=photos_albums