Cruise control wiring
11-24-2014, 11:24 PM
#1
Cruise control wiring Need info on the cruise control actuator for a 99 GM (think the unit is from a mid-nineties vehicle), want to use unit on a 1999 LS1 engine and trans in a Jaguar XK8. No necessarily look for all the features...can live with just speed hold. I would need to know wiring for pwr, VSS input, brake switch and control engage. Any help would be appreciated,(picture of unit and wire pig-tail included).
Thanks
Thanks
11-25-2014, 10:16 AM
#2
Wires on plug are as follows...
A - On/Off
B - Set/Coast
C - Resume/Accel
D - Brake light switch (hot when pedal NOT depressed)
E - Ground
F - Ignition power
G - Brake light switch (hot WITH pedal depressed)
H - empty
J - Cruise engaged signal wire (Not needed)
K - VSS from PCM
Hope this helps
A - On/Off
B - Set/Coast
C - Resume/Accel
D - Brake light switch (hot when pedal NOT depressed)
E - Ground
F - Ignition power
G - Brake light switch (hot WITH pedal depressed)
H - empty
J - Cruise engaged signal wire (Not needed)
K - VSS from PCM
Hope this helps
11-25-2014, 09:11 PM
#4
Wires on plug are as follows...
A - On/Off
B - Set/Coast
C - Resume/Accel
D - Brake light switch (hot when pedal NOT depressed)
E - Ground
F - Ignition power
G - Brake light switch (hot WITH pedal depressed)
H - empty
J - Cruise engaged signal wire (Not needed)
K - VSS from PCM
Hope this helps
A - On/Off
B - Set/Coast
C - Resume/Accel
D - Brake light switch (hot when pedal NOT depressed)
E - Ground
F - Ignition power
G - Brake light switch (hot WITH pedal depressed)
H - empty
J - Cruise engaged signal wire (Not needed)
K - VSS from PCM
Hope this helps
11-26-2014, 11:16 AM
#5
Teching In
Join Date: Sep 2013
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
11-26-2014, 08:11 PM
#6
TECH Regular
Join Date: Oct 2009
Location: Whitehall,PA
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts